SIGAS S-ANALYZER ATEX equipped with explosion proof certified cable gran head and air connection. The explosion - proof chamber has passed 100% hydraulic test. The sensor of S-ANALYZER ATEX can be chosen by customer according to application. The explosion-proof box is made of aluminum alloy, which is of better consistency, lighter weight and better flameproof performance.
Specification:
Product Type | S-ANALYZER 200 ATEX |
Channel | • Max. 4 detection channels . • Channel configuration information included: - measuring gas type - measurement range - Measuring Error |
Response time | General:<25s (t90 @60 L/h Constant Flow) |
Warm up Time | 3min~30min (accord different detector configuration) |
Digital Resolution (@zero) | General: - 0.01% in case of percent range - 0.1 µmol/mol in case of µmol/mol range |
Value Indication | Digital indication in Max. 6 digits |
Operation Handling | explosion proof button |
Analog Output | 4mA~20mA (normal operation) 2mA (in warm-up or status alarm) |
Permissible load resistance | 250Ω~350Ω |
Alarm contact output | • Instrument status alarm • upper/lower alarm Note: 1. Relay will be triggered when the instantaneous measure value of each channel becomes larger than the upper alarm limit value or smaller than the lower alarm limit value. 2. All relay contacts are isolated mutually and from the internal circuit. |
Relay Property | 1A contact (250V AC/2A, resistive load) |
Gas Connection | NPT 1/8 female |
Operating Voltage | (198~242)V AC, 50/60 Hz |
Cable Connection | Explosion proof cable gland TDJT-15 ∅6~∅13mm |
Fuse | Fuse Current: 3A ,Blow Characteristic: Fast Acting Fuse Size Metric: 5mm x 20mm |
Ex Level | ExdIICT6 Gb (containing C2H2) |
Weight | ~50Kg (typical) |
Gas Inlet Flow | (0.4~0.8)L/min (Flow fluctuations ≤0.02 L/min) Refer to specific addendum for integrated sensor module |
Inlet Gas Temp. | (5~35)℃ |
Inlet Gas Pressure | (76~116)kPa |
Moisture in Gas | • not condensing • inlet gas dew point:5℃±0.1℃ (This item is required when measure channel include SO2 and/or NO) |
Dust in gas flow | 100µg/m³, ≤1µm |
Zero calibration gas | 99.999% N2 |
Span calibration gas | 85% FS~110% FS 注Note: For O2 channel, could use dry and clean air to make span calibration if the measuring range is (0…25)%. |
3th point calibration gas | 35% FS~75% FS |
Operating Temp. | 5℃~45℃ |
Ambient Humidity | 0% RH~95% RH (not condensing) |
Ambient Air Pressure | 76kPa~116kPa |
Product Description:
- The sensor of S-ANALYZER ATEX can be chosen by customer according to application
- The explosion - proof chamber has passed 100% hydraulic test.
- Equipped with explosion proof certified cable gran head and air connection
- Equipped with flow meter window, the flow meter can be integrated in the explosion-proof analyzer
- Integrated DIN guide-type terminal for easy field maintenance
- Internal cables are 100% marked for easy maintenance
- Modular design to reduce potential maintenance costs
- The same user interface design as SIGAS non-explosion-proof S-Analyzer 200 series to reduces user learning costs
- The explosion-proof box is made of aluminum alloy, which is of better consistency, lighter weight and better flameproof performance
SIGAS S-ANALYZER ATEX equipped with explosion proof certified cable gran head and air connection. The explosion - proof chamber has passed 100% hydraulic test. The sensor of S-ANALYZER ATEX can be chosen by customer according to application. The explosion-proof box is made of aluminum alloy, which is of better consistency, lighter weight and better flameproof performance.
Specification:
Product Type | S-ANALYZER 200 ATEX |
Channel | • Max. 4 detection channels . • Channel configuration information included: - measuring gas type - measurement range - Measuring Error |
Response time | General:<25s (t90 @60 L/h Constant Flow) |
Warm up Time | 3min~30min (accord different detector configuration) |
Digital Resolution (@zero) | General: - 0.01% in case of percent range - 0.1 µmol/mol in case of µmol/mol range |
Value Indication | Digital indication in Max. 6 digits |
Operation Handling | explosion proof button |
Analog Output | 4mA~20mA (normal operation) 2mA (in warm-up or status alarm) |
Permissible load resistance | 250Ω~350Ω |
Alarm contact output | • Instrument status alarm • upper/lower alarm Note: 1. Relay will be triggered when the instantaneous measure value of each channel becomes larger than the upper alarm limit value or smaller than the lower alarm limit value. 2. All relay contacts are isolated mutually and from the internal circuit. |
Relay Property | 1A contact (250V AC/2A, resistive load) |
Gas Connection | NPT 1/8 female |
Operating Voltage | (198~242)V AC, 50/60 Hz |
Cable Connection | Explosion proof cable gland TDJT-15 ∅6~∅13mm |
Fuse | Fuse Current: 3A ,Blow Characteristic: Fast Acting Fuse Size Metric: 5mm x 20mm |
Ex Level | ExdIICT6 Gb (containing C2H2) |
Weight | ~50Kg (typical) |
Gas Inlet Flow | (0.4~0.8)L/min (Flow fluctuations ≤0.02 L/min) Refer to specific addendum for integrated sensor module |
Inlet Gas Temp. | (5~35)℃ |
Inlet Gas Pressure | (76~116)kPa |
Moisture in Gas | • not condensing • inlet gas dew point:5℃±0.1℃ (This item is required when measure channel include SO2 and/or NO) |
Dust in gas flow | 100µg/m³, ≤1µm |
Zero calibration gas | 99.999% N2 |
Span calibration gas | 85% FS~110% FS 注Note: For O2 channel, could use dry and clean air to make span calibration if the measuring range is (0…25)%. |
3th point calibration gas | 35% FS~75% FS |
Operating Temp. | 5℃~45℃ |
Ambient Humidity | 0% RH~95% RH (not condensing) |
Ambient Air Pressure | 76kPa~116kPa |
Product Description:
- The sensor of S-ANALYZER ATEX can be chosen by customer according to application
- The explosion - proof chamber has passed 100% hydraulic test.
- Equipped with explosion proof certified cable gran head and air connection
- Equipped with flow meter window, the flow meter can be integrated in the explosion-proof analyzer
- Integrated DIN guide-type terminal for easy field maintenance
- Internal cables are 100% marked for easy maintenance
- Modular design to reduce potential maintenance costs
- The same user interface design as SIGAS non-explosion-proof S-Analyzer 200 series to reduces user learning costs
- The explosion-proof box is made of aluminum alloy, which is of better consistency, lighter weight and better flameproof performance