SIGAS SPTr-GAS®ANALYZER is equipped with a 5.6'’ touchscreen, in combination with a well-arranged menu structure, intuitive and user-friendly operation are assured. All necessary status. All necessary status-, threshold-, and alarm messages for effective monitoring are provided as analogue and digital signals. Graphic display of measurement curves are also as option offered.
Specification:
| Product Type | SPTr-GAS® ANALYZER V3.0 |
| Detection Principle | Photo acoustic |
| Display LDL | 0.1 ppm (typical), Depend on Range |
| Response time | Cycle time < 20s |
| Detection Limit | < 0.01 % FS ,Depend on Range |
| Warm up Time | heat up until 50°C (122°F)， approximately 15 minutes at an ambient temperature of 20°C (68°F) |
| Value Indication | Digital indication (5.6” LCD) Unit: ppm, µmol/mol, mg/m3 |
| Operation Handling | Touch panel on 5.6” LCD |
| Gas Inlet/Outlet | NPT 1/8”(F), SU304 *External tube fittings are optionally according different application |
| Gas Supply | Cyclic controlled by internal valves |
| Internal Tube | PVC |
| Analog Output | (4~20) mA (Warm up time and Product status alarming time : 2mA) Permissible load resistance：250Ω -350Ω. |
| Contact output | Analyzer status alarm Upper/lower alarm contact output.(for gas channel) *Relay close when the instantaneous value of channel becomes larger than the upper alarm limit value or smaller than the lower alarm limit value. Relay Property:1A contact (250V AC /2A, resistive load) |
| Communication | RS232 Output (9 pin), 9600, 8,0,1 (Send out only) |
| Weight | Approx. 15Kg(Typical) |
| Operating Voltage | (198~242)V AC, 50/60 Hz; Power inlet: Conformity to EN60320 C1 |
| Fuse | Fuse Current: 5A Breaking Capacity: 1.5kA @ 250V AC Fuse Size Metric: 5mm x 20mm Blow Characteristic: Fast Acting |
| Protection Level | IP42 (EN60529) |
Product Description:
SIGAS SPTr-GAS®ANALYZER is equipped with a 5.6'’ touchscreen, in combination with a well-arranged menu structure, intuitive and user-friendly operation are assured. All necessary status. All necessary status-, threshold-, and alarm messages for effective monitoring are provided as analogue and digital signals. Graphic display of measurement curves are also as option offered.
- Professional trace gas measurement less than 5ppm
- Supports self-calibration by ambient air
- use acoustic signal for calculating concentration, less interference
- integrated infrared H2O detector, effective prevent humidity interference
- integrates pump and automatic valve control up to 3 sample points
- Equipped with an active carbon filter to prevent air pollution
- Sampling tube are stainless steel pipe, near to sample point each line has inline dust filter with exchangeable filter-element
- Effective prevent humidity interference: Integrated infra-red H2O detector for real-time calculation
- Effective prevent Temp. interference: Photoacoustic module heated to 50℃
- Effective prevent other gas interference: Calculated with acoustic signal to gas concentration
Photoacoustic technology is an innovative spectrum analysis method, which is different to tranditional infra-red technology. This method transfer effective spectrum into acoustic signal, and assemble this acoustic signal through high sensitive microphone, withthis signal the gas concentration will be calculated.
Because of special optics construction, acoustic signal assemble method and precise signal calculated process, photoacoustic technology became an effective way to assemble weak opto-acoustic signal and prevent background signal interference. It is an innovated technology special suitable for trace gas concentration measurement in complicated situation.
| Gas | Measurement range | Linearity error | Accuracy | Background gas | |
| NH3 | Ammonia | 0…100ppm | 0.5ppm / 0.1% FS | 0.1ppm / 0.1% FS | Air or N2 |
| NH3 | Ammonia | 0…1 g/m3 | 0.1% FS | 0.1% FS | Air or N2 |
| C5H10 | Cyclopentane | 0…100ppm | 0.5ppm / 0.1% FS | 0.1ppm / 0.1% FS | Air or N2 |
| C3H6O | Acetone | 0…2000ppm | 0.1% FS | 0.1% FS | Air or N2 |
| C2H6O | Ethyl Alcohol | 0…2000ppm | 0.1% FS | 0.1% FS | Air or N2 |
| C3H8O | Isopropyl Alcohol | 0…1000ppm | 0.1% FS | 0.1% FS | Air or N2 |
| CH4O | Methyl Alcohol | 0…500ppm | 0.1% FS | 0.1% FS | Air or N2 |
| NF3 | Cyclopentane | 0…20ppm | 0.5ppm / 0.1% FS | 0.1ppm / 0.1% FS | Air or N2 |
| N2O | Nitrous Oxide | 0…500ppm | 0.1% FS | 0.1% FS | Air or N2 |
| C2Cl4 | PERC | 0…800ppm | 0.1% FS | 0.1% FS | Air or N2 |
| SO2F2 | ProFume® | 0…1 g/m3 0…1000ppm 1…150 g/m3 | 0.1% FS | 0.1% FS | Air or N2 |
| CCl3F | R11 | 0…500ppm | 0.1% FS | 0.1% FS | Air or N2 |
| C2Cl3F3 | R113 | 0…50ppm | 0.5ppm / 0.1% FS | 0.1ppm / 0.1% FS | Air or N2 |
| C2F6 | R116 | 0…100ppm | 0.5ppm / 0.1% FS | 0.1ppm / 0.1% FS | Air or N2 |
| CCl2F2 | R12 | 0…100ppm | 0.5ppm / 0.1% FS | 0.1ppm / 0.1% FS | Air or N2 |
| C2HCl3F2 | R122 | 0…100ppm | 0.5ppm / 0.1% FS | 0.1ppm / 0.1% FS | Air or N2 |
| C2HCl2F3 | R123 | 0…100ppm | 0.5ppm / 0.1% FS | 0.1ppm / 0.1% FS | Air or N2 |
| CClF3 | R13 | 0…100ppm | 0.5ppm / 0.1% FS | 0.1ppm / 0.1% FS | Air or N2 |
| CF4 | R14 | 0…100ppm | 0.5ppm / 0.1% FS | 0.1ppm / 0.1% FS | Air or N2 |
| CHClF2 | R22 | 0…100ppm | 0.5ppm / 0.1% FS | 0.1ppm / 0.1% FS | Air or N2 |
| CHF3 | R23 | 0…150ppm | 0.5ppm / 0.1% FS | 0.1ppm / 0.1% FS | Air or N2 |
| C8H8 | Styrene | 0…50ppm | 0.5ppm / 0.1% FS | 0.1ppm / 0.1% FS | Air or N2 |
| SO2 | Sulfur dioxide | 0…100ppm | 0.5ppm / 0.1% FS | 0.1ppm / 0.1% FS | Air or N2 |
| SO2 | Sulfur dioxide | 0…1000ppm | 0.1% FS | 0.1% FS | SF6 |
| C8H20O4Si | TEOS | 0…100ppm | 0.5ppm / 0.1% FS | 0.1ppm / 0.1% FS | Air or N2 |
| C2HCl3F2 | Toluene | 0…100ppm | 0.5ppm / 0.1% FS | 0.1ppm / 0.1% FS | Air or N2 |
| C2HCl3 | TRI | 0…1000ppm | 0.1% FS | 0.1% FS | Air or N2 |
| CH3Br | Methyl Bromide | 0…2 g/m3 | 0.1% FS | 0.1% FS | N2 (only) |
| For other gas please contact us for more information. | |||||
SIGAS SPTr-GAS®ANALYZER is equipped with a 5.6'’ touchscreen, in combination with a well-arranged menu structure, intuitive and user-friendly operation are assured. All necessary status. All necessary status-, threshold-, and alarm messages for effective monitoring are provided as analogue and digital signals. Graphic display of measurement curves are also as option offered.
Specification:
| Product Type | SPTr-GAS® ANALYZER V3.0 |
| Detection Principle | Photo acoustic |
| Display LDL | 0.1 ppm (typical), Depend on Range |
| Response time | Cycle time < 20s |
| Detection Limit | < 0.01 % FS ,Depend on Range |
| Warm up Time | heat up until 50°C (122°F)， approximately 15 minutes at an ambient temperature of 20°C (68°F) |
| Value Indication | Digital indication (5.6” LCD) Unit: ppm, µmol/mol, mg/m3 |
| Operation Handling | Touch panel on 5.6” LCD |
| Gas Inlet/Outlet | NPT 1/8”(F), SU304 *External tube fittings are optionally according different application |
| Gas Supply | Cyclic controlled by internal valves |
| Internal Tube | PVC |
| Analog Output | (4~20) mA (Warm up time and Product status alarming time : 2mA) Permissible load resistance：250Ω -350Ω. |
| Contact output | Analyzer status alarm Upper/lower alarm contact output.(for gas channel) *Relay close when the instantaneous value of channel becomes larger than the upper alarm limit value or smaller than the lower alarm limit value. Relay Property:1A contact (250V AC /2A, resistive load) |
| Communication | RS232 Output (9 pin), 9600, 8,0,1 (Send out only) |
| Weight | Approx. 15Kg(Typical) |
| Operating Voltage | (198~242)V AC, 50/60 Hz; Power inlet: Conformity to EN60320 C1 |
| Fuse | Fuse Current: 5A Breaking Capacity: 1.5kA @ 250V AC Fuse Size Metric: 5mm x 20mm Blow Characteristic: Fast Acting |
| Protection Level | IP42 (EN60529) |
Product Description:
SIGAS SPTr-GAS®ANALYZER is equipped with a 5.6'’ touchscreen, in combination with a well-arranged menu structure, intuitive and user-friendly operation are assured. All necessary status. All necessary status-, threshold-, and alarm messages for effective monitoring are provided as analogue and digital signals. Graphic display of measurement curves are also as option offered.
- Professional trace gas measurement less than 5ppm
- Supports self-calibration by ambient air
- use acoustic signal for calculating concentration, less interference
- integrated infrared H2O detector, effective prevent humidity interference
- integrates pump and automatic valve control up to 3 sample points
- Equipped with an active carbon filter to prevent air pollution
- Sampling tube are stainless steel pipe, near to sample point each line has inline dust filter with exchangeable filter-element
- Effective prevent humidity interference: Integrated infra-red H2O detector for real-time calculation
- Effective prevent Temp. interference: Photoacoustic module heated to 50℃
- Effective prevent other gas interference: Calculated with acoustic signal to gas concentration
Photoacoustic technology is an innovative spectrum analysis method, which is different to tranditional infra-red technology. This method transfer effective spectrum into acoustic signal, and assemble this acoustic signal through high sensitive microphone, withthis signal the gas concentration will be calculated.
Because of special optics construction, acoustic signal assemble method and precise signal calculated process, photoacoustic technology became an effective way to assemble weak opto-acoustic signal and prevent background signal interference. It is an innovated technology special suitable for trace gas concentration measurement in complicated situation.
| Gas | Measurement range | Linearity error | Accuracy | Background gas | |
| NH3 | Ammonia | 0…100ppm | 0.5ppm / 0.1% FS | 0.1ppm / 0.1% FS | Air or N2 |
| NH3 | Ammonia | 0…1 g/m3 | 0.1% FS | 0.1% FS | Air or N2 |
| C5H10 | Cyclopentane | 0…100ppm | 0.5ppm / 0.1% FS | 0.1ppm / 0.1% FS | Air or N2 |
| C3H6O | Acetone | 0…2000ppm | 0.1% FS | 0.1% FS | Air or N2 |
| C2H6O | Ethyl Alcohol | 0…2000ppm | 0.1% FS | 0.1% FS | Air or N2 |
| C3H8O | Isopropyl Alcohol | 0…1000ppm | 0.1% FS | 0.1% FS | Air or N2 |
| CH4O | Methyl Alcohol | 0…500ppm | 0.1% FS | 0.1% FS | Air or N2 |
| NF3 | Cyclopentane | 0…20ppm | 0.5ppm / 0.1% FS | 0.1ppm / 0.1% FS | Air or N2 |
| N2O | Nitrous Oxide | 0…500ppm | 0.1% FS | 0.1% FS | Air or N2 |
| C2Cl4 | PERC | 0…800ppm | 0.1% FS | 0.1% FS | Air or N2 |
| SO2F2 | ProFume® | 0…1 g/m3 0…1000ppm 1…150 g/m3 | 0.1% FS | 0.1% FS | Air or N2 |
| CCl3F | R11 | 0…500ppm | 0.1% FS | 0.1% FS | Air or N2 |
| C2Cl3F3 | R113 | 0…50ppm | 0.5ppm / 0.1% FS | 0.1ppm / 0.1% FS | Air or N2 |
| C2F6 | R116 | 0…100ppm | 0.5ppm / 0.1% FS | 0.1ppm / 0.1% FS | Air or N2 |
| CCl2F2 | R12 | 0…100ppm | 0.5ppm / 0.1% FS | 0.1ppm / 0.1% FS | Air or N2 |
| C2HCl3F2 | R122 | 0…100ppm | 0.5ppm / 0.1% FS | 0.1ppm / 0.1% FS | Air or N2 |
| C2HCl2F3 | R123 | 0…100ppm | 0.5ppm / 0.1% FS | 0.1ppm / 0.1% FS | Air or N2 |
| CClF3 | R13 | 0…100ppm | 0.5ppm / 0.1% FS | 0.1ppm / 0.1% FS | Air or N2 |
| CF4 | R14 | 0…100ppm | 0.5ppm / 0.1% FS | 0.1ppm / 0.1% FS | Air or N2 |
| CHClF2 | R22 | 0…100ppm | 0.5ppm / 0.1% FS | 0.1ppm / 0.1% FS | Air or N2 |
| CHF3 | R23 | 0…150ppm | 0.5ppm / 0.1% FS | 0.1ppm / 0.1% FS | Air or N2 |
| C8H8 | Styrene | 0…50ppm | 0.5ppm / 0.1% FS | 0.1ppm / 0.1% FS | Air or N2 |
| SO2 | Sulfur dioxide | 0…100ppm | 0.5ppm / 0.1% FS | 0.1ppm / 0.1% FS | Air or N2 |
| SO2 | Sulfur dioxide | 0…1000ppm | 0.1% FS | 0.1% FS | SF6 |
| C8H20O4Si | TEOS | 0…100ppm | 0.5ppm / 0.1% FS | 0.1ppm / 0.1% FS | Air or N2 |
| C2HCl3F2 | Toluene | 0…100ppm | 0.5ppm / 0.1% FS | 0.1ppm / 0.1% FS | Air or N2 |
| C2HCl3 | TRI | 0…1000ppm | 0.1% FS | 0.1% FS | Air or N2 |
| CH3Br | Methyl Bromide | 0…2 g/m3 | 0.1% FS | 0.1% FS | N2 (only) |
| For other gas please contact us for more information. | |||||
