S-ANALYZER 200 series is a multi-gas analyzer for 19"rack-mounting. Up to 5 components can be measured and the measuring principles may be ordered in various combinations. S-ANALYZER 200 is equipped with a touchscreen. In combination with a well-arranged menu structure, intuitive and user-friendly operations is assured. All necessary status-, threshold-, and alarm messages for effective monitoring are provided as analogue and digital signals,included graphic display of measurement curves.
Specification:
| Product Type | S-ANALYZER 200 |
| Channel | • Max. 5 measured Gases • Configuration information includes - measuring gas type - measurement range - measuring Error |
| Response time | General：<25s (t90 @60 L/h Constant Flow) |
| Warm up Time | 3min~30min (accord different detector configuration) |
| Digital Res. (@zero | General： - 0.01Vol.% in case of percent range (e.g. 0.001Vol.% for BMBT O2 channel) - 0.1 µmol/mol in case of µmol/mol range |
| Value Indication | Digital indication in Max. 6 digits |
| Operation Handling | Touch panel, 5.6” TFT |
| Analog Output | 4mA~20mA (normal operation) 2mA (in warm-up or status alarm) |
| Permissible load resistance | 250Ω~350Ω |
| Alarm contact output | • Instrument status alarm • upper/lower alarm Note: 1. Relay contact close when the instantaneous measure value of each channel becomes larger than the upper alarm limit value or smaller than the lower alarm limit value. 2. All relay contacts are isolated mutually and from the internal circuit |
| Relay Property | 1A contact (250V AC/2A, resistive load) |
| Communication | RS232 (DB-9 Female) |
| Operating Voltage | 198~242V AC, 50/60 Hz |
| Power inlet | EN60320 C1 |
| Fuse | Fuse Current: 3A ,Blow Characteristic: Fast Acting Fuse Size Metric: 5mm x 20mm |
| Case Protection Level | IP42 (EN60529) |
| Weight | Approx. 15Kg (typical) |
| Gas Inlet Flow | 0.4~0.8 L/min (Flow fluctuations ≤0.02 L/min) |
| Inlet Gas Temp. | 5~35 ℃ |
| Inlet Gas Pressure | 116kPa (max) |
| Moisture in Gas | • not condensing • inlet gas dew point：5℃±0.1℃ (This item is required when measure channel include NDIR SO2 and/or NO) |
| Dust in gas flow | 100µg/m³, ≤1µm |
| Zero calibration gas | 99.999Vol.% N2 (typical) |
| Span calibration gas | 75Vol.% FS~110Vol.% FS Note: For O2 channel, could use dry and clean air to make span calibration if the measuring range is (0…25Vol.%.) |
| 3th point calibration gas | 35Vol.% FS~75Vol.% FS |
Product Description:
S-ANALYZER 200 series is a multi-gas analyzer for 19"rack-mounting. Up to 5 components can be measured and the measuring principles may be ordered in various combinations. S-ANALYZER 200 is equipped with a touchscreen. In combination with a well-arranged menu structure, intuitive and user-friendly operations is assured. All necessary status-, threshold-, and alarm messages for effective monitoring are provided as analogue and digital signals,also included graphic display of measurement curves.
- Environment pollution control
- Service and testing
- Waste gas analysis
- Process gas analysis
- Air quality control
- TOC value measurement
- Blast furnace gas detection
- Garbage landfill
- Tunnel gas detection
Product Features:
- SA-200 with touch screen control, all function in one hand.
- Three screen switch function
- Screen 1: Value status, include menu and error information
- Screen 2: real-time gas concentration and value change
- Screen 3: real-time gas concentration curve
- Calibration menu, alarm set with password control
- Function of zero, span and third point calibration to get better linearity.
- Free to choose English and Chinese menu
- one button with “back to factory setting” to provide wrong operation.
S-ANALYZER 200 series is a multi-gas analyzer for 19"rack-mounting. Up to 5 components can be measured and the measuring principles may be ordered in various combinations. S-ANALYZER 200 is equipped with a touchscreen. In combination with a well-arranged menu structure, intuitive and user-friendly operations is assured. All necessary status-, threshold-, and alarm messages for effective monitoring are provided as analogue and digital signals,included graphic display of measurement curves.
Specification:
| Product Type | S-ANALYZER 200 |
| Channel | • Max. 5 measured Gases • Configuration information includes - measuring gas type - measurement range - measuring Error |
| Response time | General：<25s (t90 @60 L/h Constant Flow) |
| Warm up Time | 3min~30min (accord different detector configuration) |
| Digital Res. (@zero | General： - 0.01Vol.% in case of percent range (e.g. 0.001Vol.% for BMBT O2 channel) - 0.1 µmol/mol in case of µmol/mol range |
| Value Indication | Digital indication in Max. 6 digits |
| Operation Handling | Touch panel, 5.6” TFT |
| Analog Output | 4mA~20mA (normal operation) 2mA (in warm-up or status alarm) |
| Permissible load resistance | 250Ω~350Ω |
| Alarm contact output | • Instrument status alarm • upper/lower alarm Note: 1. Relay contact close when the instantaneous measure value of each channel becomes larger than the upper alarm limit value or smaller than the lower alarm limit value. 2. All relay contacts are isolated mutually and from the internal circuit |
| Relay Property | 1A contact (250V AC/2A, resistive load) |
| Communication | RS232 (DB-9 Female) |
| Operating Voltage | 198~242V AC, 50/60 Hz |
| Power inlet | EN60320 C1 |
| Fuse | Fuse Current: 3A ,Blow Characteristic: Fast Acting Fuse Size Metric: 5mm x 20mm |
| Case Protection Level | IP42 (EN60529) |
| Weight | Approx. 15Kg (typical) |
| Gas Inlet Flow | 0.4~0.8 L/min (Flow fluctuations ≤0.02 L/min) |
| Inlet Gas Temp. | 5~35 ℃ |
| Inlet Gas Pressure | 116kPa (max) |
| Moisture in Gas | • not condensing • inlet gas dew point：5℃±0.1℃ (This item is required when measure channel include NDIR SO2 and/or NO) |
| Dust in gas flow | 100µg/m³, ≤1µm |
| Zero calibration gas | 99.999Vol.% N2 (typical) |
| Span calibration gas | 75Vol.% FS~110Vol.% FS Note: For O2 channel, could use dry and clean air to make span calibration if the measuring range is (0…25Vol.%.) |
| 3th point calibration gas | 35Vol.% FS~75Vol.% FS |
Product Description:
S-ANALYZER 200 series is a multi-gas analyzer for 19"rack-mounting. Up to 5 components can be measured and the measuring principles may be ordered in various combinations. S-ANALYZER 200 is equipped with a touchscreen. In combination with a well-arranged menu structure, intuitive and user-friendly operations is assured. All necessary status-, threshold-, and alarm messages for effective monitoring are provided as analogue and digital signals,also included graphic display of measurement curves.
- Environment pollution control
- Service and testing
- Waste gas analysis
- Process gas analysis
- Air quality control
- TOC value measurement
- Blast furnace gas detection
- Garbage landfill
- Tunnel gas detection
Product Features:
- SA-200 with touch screen control, all function in one hand.
- Three screen switch function
- Screen 1: Value status, include menu and error information
- Screen 2: real-time gas concentration and value change
- Screen 3: real-time gas concentration curve
- Calibration menu, alarm set with password control
- Function of zero, span and third point calibration to get better linearity.
- Free to choose English and Chinese menu
- one button with “back to factory setting” to provide wrong operation.
