[Back]Adsorption dryer
Product Overview

The dryer dries and purifies the compressed air supplied by the compressor and provides medical breathing air. The air is thereby dried alternately in one of the drying agent vessels. The dried air is subsequently purified in the third vessel, whereby oil residue and other contaminants are removed.

The dryer dries and purifies the compressed air supplied by the compressor and provides medical breathing air.

The air is thereby dried alternately in one of the drying agent vessels. The dried air is subsequently purified in the third vessel, whereby oil residue and other contaminants are removed.
 Before the compressed air is fed into the dryer, it flows through upstream filters where dust, dirt, oil and water droplets are removed. Thus, the installed upstream filter is also used for extending the service life of the drying agent.The installed downstream filters clean the compressed air from drying agent abrasions, before it is fed into the compressed air system.

The two vessels contain an extremely porous drying agent by means of which humidity is removed from the compressed air and stored just as in a sponge. The stored humidity is then removed again from the drying agent and re-introduced into the ambient environment.

To this end, the two vessels alternate between different operating modes. Whilst in one vessel, compressed air is de-humidified (adsorption), in the other vessel the humid drying agent is prepared for another charge (regeneration).

These two states, which run in parallel during compressed air preparation.

Product Overview

The dryer dries and purifies the compressed air supplied by the compressor and provides medical breathing air. The air is thereby dried alternately in one of the drying agent vessels. The dried air is subsequently purified in the third vessel, whereby oil residue and other contaminants are removed.

The dryer dries and purifies the compressed air supplied by the compressor and provides medical breathing air.

The air is thereby dried alternately in one of the drying agent vessels. The dried air is subsequently purified in the third vessel, whereby oil residue and other contaminants are removed.
 Before the compressed air is fed into the dryer, it flows through upstream filters where dust, dirt, oil and water droplets are removed. Thus, the installed upstream filter is also used for extending the service life of the drying agent.The installed downstream filters clean the compressed air from drying agent abrasions, before it is fed into the compressed air system.

The two vessels contain an extremely porous drying agent by means of which humidity is removed from the compressed air and stored just as in a sponge. The stored humidity is then removed again from the drying agent and re-introduced into the ambient environment.

To this end, the two vessels alternate between different operating modes. Whilst in one vessel, compressed air is de-humidified (adsorption), in the other vessel the humid drying agent is prepared for another charge (regeneration).

These two states, which run in parallel during compressed air preparation.

SIGAS Measurement Engineering Corp. ICP-19046713
RnD & Production Center: Building 15, No. 59 Jiangnan Rd, CEDZ, Changshu, Jiangsu Province, China | Tel.: +86-(0)512-52265350 Fax: +86-(0)512-52265360
SIGAS Nanjing: Office 705, Building 3, No. 9 Weidi Rd. Qixia District, Nanjing, Jiangsu Province, China | Tel.: +86-(0)25-85576826 Fax: +86-(0)25-85576826
SIGAS Beijing: Office 1210, No. 42, Dong Zhi Men Wai Str. Yu Fei Building, Chaoyang District, Beijing, China | Tel: +86-(0)10-64638812 Fax: +86-(0)10-64638812
SIGAS Shanghai: Office 613 Area A, 6th floor, No. 1866, Hutai Road, Baoshan District, Shanghai, China | Tel.: +86-(0)21-31499266