SIGAS SPM-O2-MODULE III use this Magnetomechanical form, with the 3 seconds fast response time and adjustable of measurement range which can offer high performance measurement data of oxygen. The span calibration can be adjust within 85%-110% of span point, which offer more better linearity. The modules are maintenance-free, have a long lifetime, give a rapid and accurate signal response and are virtually insensitive to other gases. It has a compact design which meets high quality standards.
Product type：
| S-0006223 | SPM-O2-MODULE III (Oxygen) Range 0..10Vol.% ±1% in N2 Output 4..20mA 24VDC |
| S-0006224 | SPM-O2-MODULE III (Oxygen) Range 0..2Vol.% ±1% in N2 Output 4..20mA 24VDC |
| S-0006225 | SPM-O2-MODULE III (Oxygen) Range 0..3Vol.% ±1% in N2 Output 4..20mA 24VDC |
| S-0006226 | SPM-O2-MODULE III (Oxygen) Range 0..5Vol.% ±1% in N2 Output 4..20mA 24VDC |
| S-0006227 | SPM-O2-MODULE III (Oxygen) Range 0..15Vol.% ±1% in N2 Output 4..20mA 24VDC |
| S-0006228 | SPM-O2-MODULE III (Oxygen) Range 0..25Vol.% ±1% in N2 Output 4..20mA 24VDC |
| S-0006229 | SPM-O2-MODULE III (Oxygen) Range 0..50Vol.% ±1% in N2 Output 4..20mA 24VDC |
| S-0006230 | SPM-O2-MODULE III (Oxygen) Range 0..100Vol.% ±1% in N2 Output 4..20mA 24VDC |
Specification：
| Product Name | SPM-O2-MODULE III |
| Compound | Oxygen O2 |
| Measuring range | 0-3/0-10/0-25/0-100Vol.% |
| Warm up time | 30mins |
| Response time | about 3s |
| Detection Limit (3sigma) | 1 % O2 |
| Linearity Error | 1% of O2 |
| Stability (zero) | <±0.1 % of O2 per week |
| Stability (span) | <±1% of O2 |
| Temperature Drift. (zero) | <±0,05 % of O2 per °C |
| Flow rate influence | <±0.2% of O2 at from between 20 and 100ml/min |
| Effect of Tilt | Zero Change <±0.02% of O2 per 1°tilt from horizontal |
| Effect of humidity vol.% O2 at N2 | <0.5% at 20°C |
| Analog Output | 4 … 20 mA |
| Power Supply | 24VDC |
| Power Inlet | Weipu SP1310/S7I |
| Gas Inlet Flow | Max 250ml/min Optimal 100ml/min (Flow fluctuations≤±0.02L/min) |
| Inlet Gas pressure: | Defined by max flow rate. Outlet pressure less ± 300 hPa |
| Inlet Gas Temp. | 5-45℃ |
| Moisture in Gas | • not condensing • inlet gas dew point：5℃±0.1℃ |
| Dust in gas flow | 100µg/m³, ≤1µm, Dust filter required |
| Zero calibration gas | 99.999% N2 |
| Span calibration gas | 85% FS~110% FS Note: For O2 channel, could use dry and clean air to make span calibration if the measuring range is (0…25)%. |
Product description:
The paramagnetic sensor utilizes the paramagnetic susceptibility of oxygen.
The sensor incorporates two glass spheres mounted on a rotating suspension. This assembly is suspended in a strong magnetic field. The oxygen in the surrounding gas is attracted to the magnetic field, resulting in a force on the lass spheres. The strength of torque acting on the suspension is proportional to the oxygen content of the surrounding gases.
SIGAS SPM-O2-MODULE III use this Magnetomechanical form, with the 3 seconds fast response time and adjustable of measurement range which can offer high performance measurement data of oxygen. The span calibration can be adjust within 85%-110% of span point, which offer more better linearity. The modules are maintenance-free, have a long lifetime, give a rapid and accurate signal response and are virtually insensitive to other gases. It has a compact design which meets high quality standards.
SIGAS SPM-O2-MODULE III use this Magnetomechanical form, with the 3 seconds fast response time and adjustable of measurement range which can offer high performance measurement data of oxygen. The span calibration can be adjust within 85%-110% of span point, which offer more better linearity. The modules are maintenance-free, have a long lifetime, give a rapid and accurate signal response and are virtually insensitive to other gases. It has a compact design which meets high quality standards.
Product type：
| S-0006223 | SPM-O2-MODULE III (Oxygen) Range 0..10Vol.% ±1% in N2 Output 4..20mA 24VDC |
| S-0006224 | SPM-O2-MODULE III (Oxygen) Range 0..2Vol.% ±1% in N2 Output 4..20mA 24VDC |
| S-0006225 | SPM-O2-MODULE III (Oxygen) Range 0..3Vol.% ±1% in N2 Output 4..20mA 24VDC |
| S-0006226 | SPM-O2-MODULE III (Oxygen) Range 0..5Vol.% ±1% in N2 Output 4..20mA 24VDC |
| S-0006227 | SPM-O2-MODULE III (Oxygen) Range 0..15Vol.% ±1% in N2 Output 4..20mA 24VDC |
| S-0006228 | SPM-O2-MODULE III (Oxygen) Range 0..25Vol.% ±1% in N2 Output 4..20mA 24VDC |
| S-0006229 | SPM-O2-MODULE III (Oxygen) Range 0..50Vol.% ±1% in N2 Output 4..20mA 24VDC |
| S-0006230 | SPM-O2-MODULE III (Oxygen) Range 0..100Vol.% ±1% in N2 Output 4..20mA 24VDC |
Specification：
| Product Name | SPM-O2-MODULE III |
| Compound | Oxygen O2 |
| Measuring range | 0-3/0-10/0-25/0-100Vol.% |
| Warm up time | 30mins |
| Response time | about 3s |
| Detection Limit (3sigma) | 1 % O2 |
| Linearity Error | 1% of O2 |
| Stability (zero) | <±0.1 % of O2 per week |
| Stability (span) | <±1% of O2 |
| Temperature Drift. (zero) | <±0,05 % of O2 per °C |
| Flow rate influence | <±0.2% of O2 at from between 20 and 100ml/min |
| Effect of Tilt | Zero Change <±0.02% of O2 per 1°tilt from horizontal |
| Effect of humidity vol.% O2 at N2 | <0.5% at 20°C |
| Analog Output | 4 … 20 mA |
| Power Supply | 24VDC |
| Power Inlet | Weipu SP1310/S7I |
| Gas Inlet Flow | Max 250ml/min Optimal 100ml/min (Flow fluctuations≤±0.02L/min) |
| Inlet Gas pressure: | Defined by max flow rate. Outlet pressure less ± 300 hPa |
| Inlet Gas Temp. | 5-45℃ |
| Moisture in Gas | • not condensing • inlet gas dew point：5℃±0.1℃ |
| Dust in gas flow | 100µg/m³, ≤1µm, Dust filter required |
| Zero calibration gas | 99.999% N2 |
| Span calibration gas | 85% FS~110% FS Note: For O2 channel, could use dry and clean air to make span calibration if the measuring range is (0…25)%. |
Product description:
The paramagnetic sensor utilizes the paramagnetic susceptibility of oxygen.
The sensor incorporates two glass spheres mounted on a rotating suspension. This assembly is suspended in a strong magnetic field. The oxygen in the surrounding gas is attracted to the magnetic field, resulting in a force on the lass spheres. The strength of torque acting on the suspension is proportional to the oxygen content of the surrounding gases.
SIGAS SPM-O2-MODULE III use this Magnetomechanical form, with the 3 seconds fast response time and adjustable of measurement range which can offer high performance measurement data of oxygen. The span calibration can be adjust within 85%-110% of span point, which offer more better linearity. The modules are maintenance-free, have a long lifetime, give a rapid and accurate signal response and are virtually insensitive to other gases. It has a compact design which meets high quality standards.
